Eave and Gable Extensions

Eave Ext Horiz Soff Low Gable Ext - FSP Soffit Bypass Gable and SS Roof Low Pitch

Refer to gable sections for roof panel and gable trim attachments at the building gable.

Provide air gap of 1/4" min. at bottom of panel to avoid corrosion.

CUT THIS SECTION AT END OF EXTENSION GABLE EXTENSION CHANNEL (GEC) XLGA-1 CLIP

#12-14 x 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) GABLE EXTENSION CHANNEL (GEC) INSIDE CLOSURE *

STC/MSC ROOF: (2) #12-14 X 1" PANCAKE HEAD AT PURLINS MVF/MVP ROOF: (2) #12-14 X 1 1/4" AT PURLINS (WALL COLOR )

EAVE EXTENSION PURLIN (FIELD NOTCH FOR SPECIAL CHANNEL) (2) #12-14 X 1 1/4" (WALL COLOR) #12-14 X 1" PANCAKE HEAD (24" C.C.) (2) #12-14 X 1" PANCAKE HEAD

BL

INTERMEDIATE PURLIN

BL

FRAMING CONDITION NOT SHOWN

EAVE EXTENSION END PANEL #12-14 X 1" PANCAKE HEAD (24" C.C.)

** INSIDE CLOSURE

SOFFIT RAKE ANGLE (A-20)

XXX' - X"

1

4 "

EAVE EXTENSION BEAM FSP SOFFIT PANEL #12-14 X 1" PANCAKE HEAD (12" C.C) (TYP.)

SOFFIT TRIM (VPST)

EAVE EXTENSION BEAM

1/8" X 3/8" BLIND RIVET (12" C.C.) PANEL SUPPORT (SSSP) * DRAFTING NOTE: INSIDE CLOSURE MUST BE PROVIDED ON BUILDINGS WITH LINER INSULATION SYSTEM.

(4) 1/2" X 1 1/4" BOLTS

XBC-33

SOFFIT RAKE ANGLE (A-20) #12-14 X 1" PANCAKE HEAD