Eave and Gable Extensions

STC-MSC Gable Ext Lead End w NO Soffit

PANEL CLIP w/FASTENERS (SEE ROOF PANEL PLAN)

PURLIN

PURLIN CLOSURE AT RIDGE IS TO BE FIELD CUT AND FASTENED TOGETHER WITH (2) 1/8" X 3/8" BLIND RIVETS.

PURLIN CLOSURE (GPC2 OR GPC3) (TYP) (2) PURLIN CLOSURE CLIPS (GCC1) AT EACH PURLIN CLOSURE (2) #12-14 X 1 1/4" EACH CLIP (2) 1/8" X 3/8" BLIND RIVETS (EACH CLIP)

CLOSURE CLIPS (GCC-1) (TYP.)

PURLIN CLOSURE (TYP.)

PURLIN

BL

TRI-BEAD TAPE SEALER

GABLE EXTENSION DIMENSION

PURLIN CLOSURE (GPC) #12-14 X 1" PANCAKE HEAD PRE-GLUED THERMAL SPACER FOR GABLE EXTENSION

(NOT BY CHIEF)

#12-14 X 1 1/4" (12" C.C.) (TRIM COLOR) RAKE SUPPORT (A-20-S) GABLE TRIM (GTMC) #12-14 X 1" PANCAKE HEAD (2 PER PURLIN)

1/4-14 X 1 1/4" WT (12" C.C.)

PURLIN

* 1/4-14 X 1 1/4" SHOULDER (24" C.C.)

***

PRE-GLUED THERMAL SPACER

(2) 1/8" X 3/8" BLIND RIVETS (TYP.)

STC/MSC ROOF PANEL

(NOT BY CHIEF)

(2) #12-14 X 1 1/4"' PER CLOSURE

***DRAFTING NOTE: THERMAL SPACER TO BE USED WITH NO INSULATION

(2) 1/4-14 X 7/8"

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

TOP VIEW

PURLIN CLOSURE CLIP (GCC-1) (FIELD MODIFY CLIP AS REQ'D) (2) 1/8" X 3/8" BLIND RIVETS TO CONNECT EACH CLIP TO EACH PURLIN CLOSURE (2) #12-14 X 1 1/4" TO CONNECT EACH CLIP TO EACH PURLIN

GABLE EXPANSION TRIM (GET)

**

INSIDE CLOSURE

1/4-14 X 7/8" (12" C.C.)

NOTE: · Purlin closure is to be field cut between eave struts and purlins. · Closure clips may need to be field cut to fit in purlin and staggered so #12-14 X 1 1/4" fasteners don't interfere.

1/4-14 X 7/8" (12" C.C.) PANEL CAP TRIM (SCT) RAKE ANGLE (A-20-B) FIELD NOTCH AS REQUIRED AT EACH PURLIN ROW

#12-14 X 1 1/4" (12" C.C.) #12-14 X 1" PANCAKE HEAD (EACH PURLIN) GABLE EXTENSION CHANNEL (GEC) EXTENSION FLASHING (EF)

EAVE STRUT

WALL PANEL

(2) #12-14 X 1 1/4" (2) 1/8" X 3/8" BLIND RIVETS PURLIN CLOSURE CLIPS (GCC1)

** DRAFTING NOTE: INSIDE CLOSURE MUST BE PROVIDED ON BUILDINGS WITH LINER INSULATION SYSTEM.

* NOTE: It is important that 1/4-14 X 1 1/4" SHOULDER fasteners are installed through the center of the slotted holes of the rake support.

PURLIN CLOSURE INSTALLATION