Eave and Gable Extensions

STC-MSC Gable Ext Tail End-Termination Trim w CS Soffit

PURLIN

PURLIN CLOSURE AT RIDGE IS TO BE FIELD CUT AND FASTENED TOGETHER WITH (2) 1/8" X 3/8" BLIND RIVETS.

PURLIN CLOSURE (GPC2 OR GPC3) (TYP) (2) PURLIN CLOSURE CLIPS (GCC1) AT EACH PURLIN CLOSURE (2) #12-14 X 1 1/4" EACH CLIP (2) 1/8" X 3/8" BLIND RIVETS (EACH CLIP)

CLOSURE CLIPS (GCC-1) (TYP.)

PURLIN CLOSURE (TYP.)

STC/MSC ROOF PANEL PANEL CLIP w/FASTENERS (SEE ROOF PANEL PLAN)

BL

TRI-BEAD TAPE MASTIC 1/4-14 X 7/8" WT (6" C.C.) 1/4-14 X 1 1/4" WT(24" C.C.) RAKE SUPPORT (A-20-S)

GABLE EXTENSION DIMENSION

TRI-BEAD TAPE MASTIC 1/4-14 X 1 1/4" WT (12" C.C. AND FASTEN THROUGH CLIP) TERMINATION TRIM (GTTM) #12-14 X 1 1/4" PANCAKE HEAD EACH PURLIN

PURLIN

PRE-GLUED THERMAL SPACER FOR GABLE EXTENSION

(NOT BY CHIEF)

PURLIN

PURLIN CLOSURE (GPC)

GABLE TRIM (GTMC)

(2) 1/8" X 3/8" BLIND RIVETS (TYP.)

***PRE-GLUED THERMAL SPACER (NOT BY CHIEF)

#12-14 X 1 1/4" (12" C.C.) (TRIM COLOR) * 1/4-14 X 1 1/4" SHOULDER (24" C.C.) #12-14 X 1" PANCAKE HEAD (2 PER PURLIN)

(2) #12-14 X 1 1/4"' PER CLOSURE

#12-14 X 1 1/4" AT EACH PURLIN ROW (WALL COLOR) #12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) PURLIN CLOSURE CLIP (GCC-1) (FIELD MODIFY CLIP AS REQ'D) (2) 1/8" X 3/8" BLIND RIVETS TO CONNECT EACH CLIP TO EACH PURLIN CLOSURE (2) #12-14 X 1 1/4" TO CONNECT EACH CLIP TO EACH PURLIN

TOP VIEW

(2) 1/4-14 X 7/8"

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

CS SOFFIT PANEL 1/4-14 X 7/8" (12" C.C.) JAMB TRIM (JT) 1/4-14 X 7/8" (12" C.C.) PANEL CAP TRIM (SCT)

NOTE: · Purlin closure is to be field cut between eave struts and purlins. · Closure clips may need to be field cut to fit in purlin and staggered so #12-14 X 1 1/4" fasteners don't interfere.

GABLE EXPANSION TRIM (GET)

1/4-14 X 7/8" (12" C.C.) GABLE EXTENSION CHANNEL (GEC)

EAVE STRUT

DRAFTING NOTES: ** Inside closure must be provided on buildings with liner insulation system. *** Thermal spacer to be used with no insulation.

(2) #12-14 X 1 1/4" (2) 1/8" X 3/8" BLIND RIVETS PURLIN CLOSURE CLIPS (GCC1)

INSIDE CLOSURE **

EXTENSION FLASHING (EFC)

RAKE ANGLE (A-20-B)

* It is important that 1/4-14 x 1 1/4" SHOULDER fasteners are installed through the center of the slotted holes of the rake support.

WALL PANEL

#12-14 X 1 1/4" (12" C.C.)

PURLIN CLOSURE INSTALLATION