High Profile Trim

STC-MSC Gable End w High Profile Gable Trim-Field Bend Vertical Leg and Thermal Spacer

GABLE TRIM (GTMH)

1

TRI-BEAD TAPE SEALER 1/4-14 X 1 1/4" WT (12" C.C.)

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) RAKE ANGLE (A-20-B) RAKE SUPPORT (A-20-T)

BL

* 1/4-14 X 1 1/4" SHOULDER (24" C.C.) STC/MSC ROOF PANEL (FIELD FORM 3" VERTICAL LEG TO FIT FINAL DIMENSION) THERMAL SPACER (NOT BY CHIEF)

***

INSIDE CLOSURE

*** DRAFTING NOTE: INSIDE CLOSURE MUST BE PROVIDED ON BUILDINGS WITH LINER INSULATION SYSTEM.

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

(2) 1/4-14 X 7/8"

WALL PANEL **OUTSIDE CLOSURE 1/4-14 X 7/8" (12" C.C.) GABLE EXPANSION TRIM (GET)

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN) PURLIN

* It is important that 1/4-14 x 1 1/4" shoulders are installed through the center of the slotted holes of the rake support.

** NOTE: Field cut outside closure for higher roof pitches.

Made with FlippingBook flipbook maker