MVF MVP Roof Panel

MVF-MVP Gable Lead End w Cut Roof Panel

1

GABLE TRIM (GTV) (2) #12-14 X 1 1/4" WALL COLOR (EACH CLIP) ROOF PANEL CUT BACK DIM.

L CLIP LOCATION FROM B DOUBLE BEAD TAPE MASTIC 1/4-14 X 1 1/4" WT (12" C.C.)* DOUBLE BEAD TAPE MASTIC

BL

1 3 4 "

PANEL CLIP (2) #12-14 X 1 1/4"

RAKE ANGLE (A-20-B) MVF/MVP ROOF PANEL

1"

RAKE ANGLE (A-20-B) #12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

****

PRE-GLUED THERMAL SPACER (NOT BY CHIEF)

INSIDE CLOSURE

***

PANEL CLIP w/FASTENERS (REFER TO ROOF PANEL PLAN)

(2) 1/4-14 X 7/8"

GABLE TRIM SUPPORT (GTS) (10'-0" C.C) GABLE EXPANSION TRIM (GET) 1/4-14 X 7/8" (12" C.C) ** OUTSIDE CLOSURE WALL PANEL

#12-14 X 1 1/4" (2 EACH PURLIN) (WALL COLOR)

PURLIN

*NOTE: This fastener must not hit the purlin.

**NOTE: Field cut outside closure for higher roof pitches.

*** DRAFTING NOTE: INSIDE CLOSURE MUST BE PROVIDED ON BUILDINGS WITH LINER INSULATION SYSTEM.

****DRAFTING NOTE: THERMAL SPACER TO BE USED WITH NO INSULATION