MVF MVP Roof Panel

MVF-MVP Gable Lead End Height Change-Thermal Spacer

* FIELD CUT BOTTOM OF WALL PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION.

HEIGHT CHANGE TRIM TOP (GHVT)

MVF/MVP ROOF PANEL DOUBLE BEAD TAPE MASTIC 1/4-14 X 7/8" WT (12" C.C.)** TAPE MASTIC HEIGHT CHANGE TRIM BOTTOM (GHVB) (2) #12-14 X 1 1/4" (EACH CLIP) WALL COLOR

*WALL PANEL INSIDE CLOSURE #12-14 X 1 1/4"

BL

(6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

1

4 "

THERMAL SPACER

(NOT BY CHIEF)

PANEL CLIP RAKE ANGLE (A-20-L) #12-14 X 1 1/4" (2 EACH PURLIN) (WALL COLOR)

(2) #12-14 X 1 1/4"

1"

PANEL CLIP w/FASTENERS (REFER TO ROOF PANELING PLAN)

PURLIN

**NOTE: This fastener must not hit the purlin.