MVF MVP Roof Panel

MVF-MVP Eave Isometric w Gutter

MVF/MVP ROOF PANEL

(22) 1/8" X 3/8" BLIND RIVETS

(4) 1/8" X 3/8" BLIND RIVETS

GABLE TRIM (GTVC)

GABLE TRIM (GTVC)

GUTTER STRAP (GSM) (FASTENERS NOT SHOWN)

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

GABLE TRIM PLUG (TPLVC/TPRVC)

EAVE GUTTER (EGM)

(13) 1/8" X 3/8" BLIND RIVETS

FILL HOLE W/ 1/8" X 3/8" BLIND RIVET (BOTH LEGS)

GABLE CORNER TRIM (GCTVC)

GABLE EXPANSION TRIM (GET)

NOTE: 1. Use 2" lap at splices, and field cut 3/8" lockform at splice. 2. Fasten splice with (13) 1/8" x 3/8" blind rivets. 3. Use SIKA-511 sealant at splice.

NOTE: 1. Start gable trim 3" out from end of roof panel. Notch gable trim to avoid corner box rivets. 2. Start eave gutter 3" out from endwall building line. 3. Locate Gable Trim Plug as close to building line as possible. Field notch as required. 4. Use SIKA-511 sealant at plug and corner trim to gutter.

GABLE TRIM SPLICE

GABLE CORNER TRIM WITH GUTTER