Special Features

Canopy CS Roof Eave Gutter w FSP Soffit

NOTES: * See isometric detail for installation of pigtail mastic ** Purlin is a typical example. See Canopy framing drawings for required number of purlin rows.

BL

X'-X"

1/4-14 X 7/8" WT (12" C.C.) HEIGHT CHANGE TRIM (LHTC) INSIDE CLOSURE #12-14 X 1 1/4" (TYP.) (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) (2) #12-14 X 1 1/4" (GA) ( 36" C.C.)

(2) 1/4-14 X 1 1/4" WT EACH STRAP

RAKE ANGLE (A-20-B) WALL PANEL (TYP.) 1 1 2 "

1/4-14 X 1 1/4" WT (6" C.C.) (TYP.) (2) 1/4-14 X 7/8" WT EACH STRAP INSIDE CLOSURE

* INSIDE CLOSURE WITH TAPE MASTIC TOP & BOTTOM

8 11

16 "

Provide air gap of 1/4" min. at bottom of panel to avoid corrosion.

GUTTER STRAP (GS) (___" C.C.) 1/4-14 X 7/8" WT (6"C.C.)

OUTSIDE CLOSURE (2" X 3') 2 ROWS DOUBLE BEAD MASTIC TOP & BOTTOM OF OUTSIDE CLOSURE

1 4 "

4"

CANOPY CS ROOF PANEL

(1) 1/4-14 X 7/8" (TRIM COLOR)

9"

1/4-14 X 1 1/4" WT (__" C.C.)

GIRT

EAVE STRUT

1/4-14 X 7/8" (12" C.C.) (SOFFIT COLOR) OUTSIDE CLOSURE SOFFIT TRIM (SBLTO) 1/8" X 3/8" BLIND RIVET (12" C.C.)

EAVE GUTTER (EGA) #12-14 X 1 1/4" (12" C.C.) (TRIM COLOR)

#12-14 X 1" PANCAKE HEAD (12" C.C.) (TYP.) 1/4-14 X 7/8" (EACH RIB) (SOFFIT COLOR) ** CANOPY PURLIN (TYP.)

1/4-14 X 7/8" (EACH RIB) (SOFFIT COLOR)

CANOPY EAVE FLASHING (GELA)

CANOPY EAVE BOTTOM FLASHING (GLBA) 1/4-14 X 7/8" (12" C.C.)

DRAFTING NOTE: · 26 GA FSP soffit must always have 1/4-14 x 7/8" fasteners located at ribs at end supports. change fasteners to "DIM" layer.

FSP SOFFIT PANEL

CANOPY CS ROOF PANEL

TAPE MASTIC AT PANEL LAP

1/4-14 X 1 1/4" WT (6" C.C.)

PIGTAIL TAPE MASTIC (Install a "Pig Tail" down the bearing leg of panel to form a continuous line of tape mastic with panel lap and closure.)

1/4-14 X 7/8" WT (6" C.C.)

1"

CS INSIDE CLOSURE

TAPE MASTIC ON TOP OF CLOSURE

EAVE GUTTER (EGA)

TAPE MASTIC ON BOTTOM OF CLOSURE

EAVE MEMBER EXTENSION FLASHING (EF)

CS INSIDE CLOSURE

EAVE EXTENSION FLASHING (EEFA)

PIGTAIL TAPE MASTIC INSTALLATION WITH EAVE GUTTER AT CANOPY