Special Features

Z-Purlin to Rafter 6-8 Flange and CS Roof Trans Exp

SPECIAL PUNCH 9/16" HOLES AT 1 3/8" DIM A AND 4 1/4" GAGE IN BOTH PURLINS

* Finger tighten 1st 1/2" dia. nut to hard washer, wrench tighten second nut to first nut to create a sliding connection. ** Maintain 2 1/2" between fixed and sliding purlin during building erection.

(2) #12-14 X 1 1/4" (AT EACH PURLIN) (WALL COLOR) SPECIAL RAKE ANGLE (PL- ) SLIDING PURLIN (4) 1/2" X 1 1/4" BOLTS

CL

1 1 4 "

4 1 2 "

REF PT

5 1 8 "

1 3 8 "

1 1 4 "

1 3 8 " 4 1 4 "

MAKE FROM BASE ANGLE COIL

XBC-96 * (2) 1/2" X 1 3/4" BOLTS w/ (2) NUTS AND (1) 1/2" HARD WASHER AT SLOT (BOLTS MUST BE CENTERED IN SLOT)

3 1 4 "

**2 1 2 "

FIXED PURLIN

ANGLE FLANGE BRACE (SEE CROSS SECTION FOR PIECE MARK AND BOLTING CONNECTION, INSTALL ONLY ON FIXED PURLIN SIDE)

FRAME RAFTER