Special Features

Z-Purlin to Rafter 6-8 Flange and MVF-MVP Roof Trans Exp

* Finger tighten 1st 1/2" dia. nut to hard washer, wrench tighten second nut to first nut to create a sliding connection. SPECIAL PUNCH 9/16" HOLES AT 1 3/8" DIM A AND 4 1/4" GAGE IN BOTH PURLINS

* (2) 1/2" X 1 3/4" BOLTS w/ (2) NUTS AND (1) 1/2" HARD WASHER AT SLOT (BOLTS MUST BE CENETERD IN SLOT) (4) 1/2" X 1 1/4" BOLTS

CL

1 1 4 "

4 1 2 "

REF PT

SLIDING PURLIN

1 1 4 "

1 3 8 " 4 1 4 "

XBC-96

3 1 4 "

**2 1 2 "

FIXED PURLIN

FRAME RAFTER

ANGLE FLANGE BRACE (SEE CROSS SECTION FOR PIECE MARK AND BOLTING CONNECTION, INSTALL ONLY ON FIXED PURLIN SIDE)

** Maintain 2 1/2" between fixed and sliding purlin during building erection.