Special Features

Long Span Joist to Rafter w 10 Flange Trans Exp

** FINGER TIGHTEN 1ST 3/4" DIA. NUT TO HARD WASHER, WRENCH TIGHTEN SECOND NUT TO FIRST NUT TO CREATE A SLIDING CONNECTION.

4" gage in rafter and joists for long span joists

1

* SLIDING JOIST FIXED JOIST RAFTER BEAM

4 1 2 "

** (2) 3/4" X ___ BOLTS w/ (2) NUTS AND (1) 3/4" DIA. HARD WASHER AT EACH SLOT (BOLTS MUST BE CENTERED IN SLOT * SLIDING JOIST (HAS 2 13/16" SLOTS)

CL

REF PT

1 1 4 "

(2) 3/4" X ___ BOLTS w/ 3/4" DIA. HARD WASHER AT SLOT SIDE

3.50

** (2) 3/4" X ___ BOLTS w/ (2) NUTS AND (1) 3/4" DIA. HARD WASHER AT EACH SLOT (BOLTS MUST BE CENTERED IN SLOT

7"

FIXED JOIST RAFTER BEAM

SLIDING SIDE

* ERECTOR NOTE: IT IS CRITICAL TO DOUBLE NUT AND CREATE THE SLIDING CONNECTION AT

ANGLE FLANGE BRACE NOT SHOWN (SEE CROSS SECTION FOR PIECE MARK, INSTALL ONLY ON FIXED JOIST SIDE)

(2) 3/4" X ___ BOLTS w/ 3/4" DIA. HARD WASHER AT SLOT SIDE

THE CORRECT SIDE. THE SLIDING JOISTS HAVE A LONGER 2 13/16" SLOT.

7"

1.50 min.

FIXED SIDE

SECTION

must be this long to support rake angle on fixed side

5"

3 1 4 " MIN.