Special Features

MVF-MVP Height Change at Gable Tail End w Taller Backup Panel and Thermal Spacer

* FIELD CUT BOTTOM OF BACK-UP PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION.

DOUBLE BEAD TAPE MASTIC 1/4-14 X 1 1/4" WT (12" C.C.)** DOUBLE BEAD TAPE MASTIC HEIGHT CHANGE TRIM BOTTOM (GHVB) HEIGHT CHANGE TRIM TOP (GHVT) (2) #12-14 X 1 1/4" (EACH CLIP) WALL COLOR ROOF PANEL CUT BACK DIM. CLIP LOCATION FROM B L TAPE MASTIC

TAPE MASTIC SENT FOR BACK-UP PANEL SIDE LAPS. WARRANTY FASTENERS SENT FOR BACK-UP PANEL.

BL

*BACK-UP PANEL INSIDE CLOSURE w/ TAPE MASTIC TOP & BOTTOM 1/4-14 X 1 1/4" WT

2 1 4 "

1 1 2 "

(6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

MVF/MVP ROOF PANEL RAKE ANGLE (A-20-B)

PANEL CLIP w/FASTENERS (REFER TO ROOF PANEL PLAN)

1

4 "

RAKE ANGLE (A-20-L)

#12-14 X 1 1/4" (2 EACH PURLIN) (WALL COLOR) PANEL CLIP w/ FASTENERS (REFER TO ROOF PANELING PLAN)

(NOT BY CHIEF)

THERMAL SPACER

**NOTE: This fastener must not hit the purlin.

PURLIN