Special Features

Parapet at High Side w STC-MSC w Support Girt and Thermal Spacer

PARAPET GIRT

PARAPET CAP TRIM (PCT-X) 1/4-14 X 7/8" WT (12" C.C.) OUTSIDE CLOSURE Provide air gap of 1/4" min. at bottom of panel to avoid corrosion.

#12-14 X 1 1/4" (TYP) (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) #12-14 X 1 1/4" (24" C.C.) * PARAPET CLEAT (PCC-X)

BL

Tape mastic sent for back-up panel side laps. Warranty fasteners sent for back-up panel.

XXX'-X"

#12 - 14 X 1" PANCAKE HEAD (12"C.C)

HEIGHT CHANGE TRIM (LHET) INSIDE CLOSURE w/ TAPE MASTIC TOP & BOTTOM BACK-UP PANEL

OUTSIDE CLOSURE

XXX'-X"

***TRI-BEAD TAPE MASTIC OUTSIDE CLOSURE 1/4-14 X 1 1/4" WT (9 PER PANEL) TRI-BEAD TAPE MASTIC ** 1/4-14 X 7/8" WT (6" C.C.)

1

4 "

PARAPET/WALL PANEL

1/4-14 X 1 1/4" WT (6" C.C.) (TYP)

STC/MSC ROOF PANEL

* Refer to isometric parapet facade cap trim splice detail for installation

** For screw spacing refer to High Side Height Change detail in the MSC/STC Roof Panel Erection Manual. *** 24" STC - Pre-Cut Tri-Bead Tape Mastic. 24" MSC - Tri-Bead Tape Mastic from roll. 18" MSC/STC - Tri-Bead Tape Mastic from roll.

PANEL CLIP W/ FASTENERS (SEE ROOF PANEL PLAN)

THERMAL SPACER

(NOT BY CHIEF)

4"

PURLIN

8"

BACK-UP PLATE