Special Steel Framing

Diverter Side View Corner Diverter MVF-MVP Roof

2

REFER TO DETAIL BY THE DIVERTER SUPPLIER FOR ADDITIONAL INSTALLATION INSTRUCTIONS.

BL

DIVERTER WIDTH

BACKUP PANEL (CONNECTION NOT SHOWN)

EXTERIOR WALL PANEL IS NOT SHOWN

1

GIRT (TYP)

BL

*** FLAT OF PANEL MUST ALIGN WITH DIVERTER SUPPORT J FOR DIVERTER CONNECTION

INSIDE CLOSURE WITH TAPE MASTIC INSIDE AND OUTSIDE

CORNER DIVERTER

DIVERTER SUPPORT J (PL- )

***

1'-0"

DIVERTER HEIGHT

8"

CLIP OFFSET

MVF / MVP ROOF PANEL

*

6"

* HEIGHT CHANGE TRIM IS NOT SHOWN

3"

THERMAL SPACER (NOT BY CHIEF)

FIELD CUT DIVERTER SUPPORT J AS REQUIRED

ROOF PANEL IS FOR REFERENCE ONLY REFER TO ROOF PANEL PLAN AND DETAILS FOR CONNECTION.

TAPE SEALER AROUND PERIMETER OF THE DIVERTER / ROOF OPENING (BY DIVERTER SUPPLIER)

PURLIN

1/4-14 X 1" (EACH END AND 12" C.C.)

** 1/4-14 X 1 1/4 WT (4" C.C. AT PANEL / DIVERTER EDGES) ** THESE FASTENERS GO INTO THE SUPPORT J.

REFER TO OTHER SECTIONS ON THE DRAWINGS FOR ADDITIONAL INSTALLATION INSTRUCTIONS.

SIDE SUPPORT JAMB