Steel Framing Sections

5-7.Flange Brace XFBT-2 and XFBP-7

NOTE: · Fill all holes in the flange brace with bolts. · If flange brace connection occurs within the purlin lap, install flange brace before tightening purlin bolts. · Flange brace may be one side only. For location and number of sides refer to Cross Sections, Endwall and Sidewall drawings. · Flange brace is sent shop assembled; 3/4" diameter bolt will require additional tightening at time of installation. See Cross Section for proper tightening procedure.

BRACE DISTANCE

RAFTER/COLUMN PURLIN/GIRT

8 1/8"

(2) 1/2" X 1 1/4" BOLTS

(1) 3/4" X 2" BOLT

FLANGE BRACE (FB-x)

(1) 3/4" X 2" BOLT

FLANGE BRACE "5-7 CONNECTION"

Made with FlippingBook - Online catalogs