Composite Material, Rigid Board, R-Seal

CS Rigid Roof-Wall High Side

NOTES: * See isometric detail "PIGTAIL TAPE MASTIC INSTALLATION WITH HIGH SIDE EAVE TRIM". ** Insulation is representative. Erector shall refer to insulation manufacturer’s installation information for further details/direction. The erector is responsible for providing the final solution for installation, air tightness, and performance of the liner insulation system.

CS ROOF PANEL

1/4-14 X 7/8" WT (12" C.C.)

TAPE MASTIC ON TOP OF CLOSURE

HIGHSIDE EAVE TRIM (HSEC)

1/4-14 X 7/8" WT (12" C.C.)

TAPE MASTIC AT PANEL LAP

#12-14 X ___" (6" C.C.)

BL

1 1

* OUTSIDE CLOSURE w/ TAPE MASTIC TOP AND BOTTOM

2 "

INSIDE CLOSURE

PANEL OVERHANG FROM INSUL.

1/4-14 X 7/8" (12" C.C.) HI-SIDE EAVE TRIM (HSEC)

CS ROOF PANEL

WALL PANEL

CS INSIDE CLOSURE

CS OUTSIDE CLOSURE

1"

TOP OF PURLIN

TAPE MASTIC ON BOTTOM OF CLOSURE

EAVE STRUT ** ___" RIGID CONTINUOUS INSULATION (NOT BY CHIEF)

EAVE

HEIGHT

SPECIAL TRIM CAP (SPT-x)

PIGTAIL TAPE MASTIC (Install a "Pig Tail" down the bearing leg of panel to form a continuous line of tape mastic with panel lap and closure.)

#12-14 X ___" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

INSIDE CLOSURE

EAVE MEMBER

OUTSIDE CLOSURE 1/4-14 X 7/8" (12" C.C.)

TRIM CAP (TCH)

WALL PANEL

** ___" RIGID CONTINUOUS INSULATION (NOT BY CHIEF)

PIGTAIL TAPE MASTIC INSTALLATION WITH HIGH SIDE EAVE TRIM ≤ 2:12

(Rigid Insulation Not Shown)