Composite Material, Rigid Board, R-Seal

CS Rigid Roof-Wall Gable

NOTES: * Field cut outside closure for higher roof pitches.

** Insulation is representative. Erector shall refer to insulation manufacturer’s installation information for further details/direction. The erector is responsible for providing the final solution for installation, air tightness, and performance of the liner insulation system.

#12-14 X _____" (12" C.C.) DOUBLE BEAD TAPE MASTIC CS ROOF PANEL ** ____" RIGID CONTINUOUS INSULATION (NOT BY CHIEF)

BL

RAKE ANGLE (A-20) GABLE TRIM (SPT-x) #12-14 X ____" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

2 1/8"

INSIDE CLOSURE

1/4-14 X 7/8" (12" C.C.) *OUTSIDE CLOSURE

WALL PANEL ** _____" RIGID CONTINUOUS INSULATION (NOT BY CHIEF)

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN)

PURLIN