Eave and Gable Extensions

STC-MSC Low Side Eave Ext w Eave Trim and NO Soffit and Thermal

1/4-14 X 1 1/4" WT (6 PER PANEL) 1/8" X 3/8" BLIND RIVET (PARCHMENT) (2 PER PLUG) TRAPEZOID PLUG (TRP) AT EACH HIGH RIB PRE-GLUED THERMAL SPACER FOR EAVE EXTENSION (NOT BY CHIEF) PANEL CLIP W/ FASTENERS (SEE ROOF PANEL PLAN)

METAL INSIDE CLOSURE TRI-BEAD TAPE MASTIC (TOP AND BOTTOM) STC/MSC ROOF PANEL 2" STRIP OF TRI-BEAD TAPE MASTIC BETWEEN PANELS 1/4-14 X 1 1/4" WT (8 PER PANEL)

BL

* TRAPEZOID PLUG (TRP) AT EACH HIGH RIB

5 1

2 "

1/4-14 X 7/8" WT (5 PER PANEL)

DOUBLE BEAD TAPE MASTIC (TOP AND BOTTOM)

INTERMED. PURLIN ***

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

EAVE TRIM (ETM) 1/4-14 X 7/8" (12" C.C.)

INSIDE CLOSURE **

1/4-14 X 1" (2 PER CLOSURE)

1/4-14 X 7/8" (12" C.C.)

EXTENSION FLASHING (EF)

#12-14 X 1 1/4" (12" C.C.) (TRIM COLOR)

PANEL CAP TRIM (SCT)

DRAFTING NOTES: ** Inside closure must be provided on buildings with liner insulation system. *** If intermediate purlin is required, chg purlin, t-spacer and all fasteners to "dim" layer.

WALL PANEL

NOTE: Jamb trim around extension beam as required.

* See isometric Trapezoid Plug Installation detail for installation instructions.