Eave and Gable Extensions

MVF-MVP Low Side Eave Ext w Eave Gutter FSP Soffit and Thermal Spacer

**DRAFTING NOTE: Inside closure must be provided on buildings with Liner Insulation System.

(2) 1/4-14 X 7/8" WT 1/4-14 X 1 1/4" WT (4 PER PANEL)

PRE-GLUED THERMAL SPACER FOR EAVE EXTENSION PANEL CLIP w/FASTENERS

BL

GUTTER STRAP (GSM) (2'-8" C.C AT PANEL HI-RIBS) 1/4-14 X 7/8" WT (6" C.C.) TAPE MASTIC

"PIG TAIL" TAPE MASTIC (BETWEEN PANELS) MVF/MVP ROOF PANEL

(NOT BY CHIEF)

1/4-14 X 7/8" (12" C.C.) (SOFFIT COLOR) NOTE: If intermediate purlin is required, chg purlin, all fasteners, and pre-glued thermal spacer to "DIM" layer.

#12-14 X 1 1/4" (TRIM COLOR)

EAVE GUTTER (EGM)

1/4-14 X 1 1/4" WT (4 PER PANEL)

1/4-14 X 7/8" (12" C.C.) (SOFFIT COLOR) OUTSIDE CLOSURE INSIDE CLOSURE ** #12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

DOUBLE BEAD TAPE MASTIC

#12-14 X 1 1/4" (12" C.C.) (TRIM COLOR)

1/4-14 X 7/8" (12" C.C.)

#12-14 X 1" PANCAKE HEAD (12" C.C. FSP SOFFIT PANEL 1/4-14 X 7/8" (EACH RIB) (SOFFIT COLOR) 1/8" x 3/8" BLIND RIVET (12" C.C.)

EAVE EXTENSION FLASHING (EEFA)

EXTENSION FLASHING (EF)

#12-14 X 1" PANCAKE HEAD (12" C.C.)

SOFFIT TRIM (SBLTO) 1/8" X 3/8" BLIND RIVET (12" C.C.) #12-14 X 1" PANCAKE HEAD (12" C.C.)

PANEL OVERHANG

GUTTER STRAP LAP

GUTTER PROFILE EGM0

PITCH

<=3/4:12 >3/4:12 to <=1 1/2:12 >1 1/2:12 to <=2 1/2:12 >2 1/2:12 to <=3 1/2:12 >3 1/2:12 to <=4 1/2:12

3 3/4 3 1/2

7 1/8 6 11/16

EGM1

WALL PANEL

EGM2

3 1/4

6 3/8

EGM3

2 7/8

5 11/16

EGM4

3 1/2

5 5/8

All Dimensions in Inches