Eave and Gable Extensions

MVF-MVP Low Side Eave Ext w Eave Trim FSP Soffit and Thermal Spacer

NOTE: If intermediate purlin is required, chg purlin, all fasteners, and pre-glued thermal spacer to "DIM" layer.

1/4-14 X 1 1/4" WT (4 PER PANEL) "PIG TAIL" TAPE MASTIC (BETWEEN PANELS)

** DRAFTING NOTE: Inside closure must be provided on buildings with Liner Insulation System.

PRE-GLUED THERMAL SPACER FOR EAVE EXTENSION

BL

(NOT BY CHIEF)

MVF/MVP ROOF PANEL

5"

#12-14 X 1" PANCAKE HEAD (12" C.C.) 1/4-14 X 7/8" (12" C.C.) (SOFFIT COLOR)

1/4-14 X 7/8" WT (12" C.C.) TAPE MASTIC

PANEL CLIP w/ FASTENERS

EAVE TRIM (ETM)

1/4-14 X 1 1/4" WT (4 PER PANEL)

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

1/4-14 X 7/8" (12" C.C.) #12-14 X 1 1/4" (12" C.C.) (TRIM COLOR) EXTENSION FLASHING (EF)

** INSIDE CLOSURE

FSP SOFFIT PANEL DOUBLE BEAD TAPE MASTIC

OUTSIDE CLOSURE

1/4-14 X 7/8" (12" C.C.) (SOFFIT COLOR) SOFFIT TRIM (SBLTO)

#12-14 X 1" PANCAKE HEAD (12"C.C.)

1/8" X 3/8" BLIND RIVET (12" C.C.) 1/4-14 X 7/8" (EACH RIB) (SOFFIT COLOR)

#12-14 X 1" PANCAKE HEAD (12" C.C.) WALL PANEL 1/8" X 3/8" BLIND RIVET (12" C.C.)