MVF / MVP - Erection Manual
MVF/MVP M echanically S eamed V ertical Leg F lat M echanically S eamed V ertical Leg P encil-rib
®
GENERAL INFORMATION
PRODUCT CHECKLIST
#12-24 x 1-1/2"
• Mid-fixed point plate to bar joist.
1/4"-14 x 1"
• Mid-fixed point plate to purlin.
5/16" Hex Head with Washer 5/8" O.D. washer
5/16" Hex Head with Washer 5/8" O.D. washer
Double Bead Tape Mastic
Thermal Spacer
• Between the trim cap and the bottom of the roof panel. • Between the ridge closure and the roof panel. • Between the ridge closure and the roof cap. • Between the roof panel and the gable trim.
• Polystyrene block used to increase the insulation capacity along the purlins (optional).
Thickness
1" 1-5/8” 5/8"
15"
3"
3/16” x 7/8” x 40'
Tape Mastic
• Between eave gutter flange or the eave trim and the bottom of the roof panel. • Between the panel high ribs at the eave and ridge.
Sikaflex-201
• Polyurethane sealant. • Used at exposed areas or areas where some "fill" is required. • This sealant is UV resistant.
201
3/32” x 3/4” x 50'
Sikalastomer-511
Triple Bead Tape Mastic
• Valleys
• Non-skinning, non shrinking sealant. • Panel endlaps.
• Trim cap laps, ridge or height change laps, gable trim laps and gutter laps. • This sealant is not UV resistant. • Used at non-exposed areas.
511
3/16” x 2 1/2” x 20'
MVF/MVP-8
Version 2.0
SUBJECT TO CHANGE WITHOUT NOTICE
Made with FlippingBook - Online catalogs