STC - Erection Manual

STC

®

S nap T ight C onstruction

GENERAL INFORMATION PRODUCT CHECKLIST

1/4”-14 x 1-1/4” WT (warranted)

#12-14 x 1-1/4"

• Roof Panel to steel. • Roof Trim to steel.

• Panel to steel. • Trim to steel. • Angle to purlins.

5/16" Hex Head with washer (Long life exterior fastener)

5/16" Hex Washer Head with 5/8" O. D. Washer

1/4"-14 x 7/8"

1/4”-14 x 7/8” WT (warranted)

• Roof Panel to panel. • Roof Trim to panel. • Ridge flashing to ridge closure.

• Panel to panel. • Trim to panel.

5/16" Hex Head with Washer (Long life exterior fastener)

5/16" Hex Washer Head with 5/8" O. D. Washer

#17 x 1" WT (warranted)

#12-14 x 1" Pancake Head

• Repair fastener for stripped out.

• Rake angle to purlins, 12 gauge or less.

5/16" Hex Head with Washer (Long life exterior fastener)

#2 Phillips Square Drive

1/4"-14 x 1"

#12-24 x 1-1/2" Pancake Head

• Clip to purlin for 4" or less over-the-purlin insulation • Inside closure to eave plate or eave strut. • Mid-fixed point plate to purlin for 4" or less over-the-purlin insulation.

• Rake angle to bar joist • Greater than 12 gauge.

5/16" Hex Head with Washer 5/8" O.D. washer

#2 Square Drive

1/4"-14 x 1-1/2"

1/4"-14 x 1-1/4" Shoulder

• Support angle to rake angle with purlins or bar joist. • Floating eave plate to eave strut.

• Clip to purlin >4" to <8" over the-purlin insulation. • Mid-fixed point plate to purlin for >4" or <8" over-the-purlin insulation.

5/16" Hex Head with Washer 5/8" O.D. washer

5/16" Hex Head

#12-24 x 1-1/2"

1/8" x 3/8" Blind Rivet

• Clip to joist >4" to <8" over the-joist insulation. • Mid-fixed point plate to bar joist for >4" or <8" over-the joist insulation. • Greater than 12 gauge.

• Trim to trim. • Trim to steel. • Outside closure to back-up plate at hip condition.

5/16" Hex Head with Washer 5/8" O.D. washer

Aluminum Body - Steel Shank

SUBJECT TO CHANGE WITHOUT NOTICE

Version 7.1

STC-7