STC MSC Roof Panel

MSC 2-Inch-Inset Gable Tail Height Change-Thermal Spacer

HEIGHT CHANGE ANGLE (A-20-H) *WALL PANEL #12-14 X 1 1/4"

* FIELD CUT BOTTOM OF WALL PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION.

BL

HEIGHT CHANGE TRIM TOP (GHMTF) INSIDE CLOSURE

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING) (SEE INSET DETAIL) TRI-BEAD TAPE SEALER

(6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

THERMAL SPACER MSC ROOF PANEL 1/4-14 X 1 1/4" WT (12" C.C.)

1/4-14 X 1 1/4" SHOULDER (24" C.C.)**

1

4 "

(NOT BY CHIEF)

HEIGHT CHANGE TRIM BOTTOM (GHMBF)

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN) RAKE SUPPORT (A-20-2)

2"

PURLIN

** IT IS IMPORTANT THAT FASTENERS ARE INSTALLED THROUGH THE CENTER OF THE SLOTTED HOLES OF THE RAKE SUPPORT.

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING)