STC MSC Roof Panel

STC-MSC Eave Isometric w Trim Cap

(15) 1/8" X 3/8" BLIND RIVETS

STC/MSC ROOF PANEL

STC/MSC ROOF PANEL

(4) 1/8" X 3/8" BLIND RIVETS

GABLE TRIM (GTMC)

GABLE TRIM (GTMC)

TRIM CAP (TCM)

TRIM CAP (TCM)

TRI-BEAD TAPE MASTIC UNDER METAL INSIDE CLOSURE

FILL HOLE W/ 1/8" X 3/8" BLIND RIVET (BOTH SIDES)

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

GABLE TRIM PLUG (TPRMC/TPLMC)

(12) 1/8" X 3/8" BLIND RIVETS

*METAL INSIDE CLOSURE (FASTENERS NOT SHOWN)

GABLE CORNER TRIM (GCTMC)

GABLE EXPANSION TRIM (GET)

2" STRIP OF MINOR RIB TAPE MASTIC (TYP.)

NOTE: 1. Use 2" lap at splices, and field cut 3/8" lockform at splice. 2. Fasten splice with (12) 1/8" x 3/8" blind rivets. 3. Use SIKA 511 sealant at splice.

NOTE: 1. Start gable trim even with end of roof panel. Notch gable trim to avoid corner box rivets. 2. Locate Gable Trim Plug as close to building line as possible. Field notch as required. 3. Use SIKA 511 sealant at plug and corner trim.

* Edge of mastic aligns with face of metal inside closure.

TRI-BEAD TAPE MASTIC

GABLE TRIM SPLICE

METAL INSIDE CLOSURE WITH TRIM CAP ONLY

GABLE CORNER TRIM WITH TRIM CAP