STC MSC Roof Panel

STC-MSC Gable Lead End

1/4-14 X 1 1/4" WT (12" C.C.) TRI-BEAD TAPE SEALER

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) RAKE ANGLE (A-20-B) RAKE SUPPORT (A-20-S) GABLE TRIM (GTM)

1

*1/4-14 X 1 1/4" SHOULDER (24" C.C.) STC/MSC ROOF PANEL PRE-GLUED THERMAL SPACER (NOT BY CHIEF) ****

BL

PURLIN

**** DRAFTING NOTE: THERMAL SPACER TO BE USED WITH NO INSULATION.

INSIDE CLOSURE

***

*** DRAFTING NOTE: INSIDE CLOSURE MUST BE PROVIDED ON BUILDINGS WITH LINER INSULATION SYSTEM.

**OUTSIDE CLOSURE WALL PANEL 1/4-14 X 7/8" (12" C.C.) GABLE TRIM SUPPORT (GTS) (10'-0" C.C.) GABLE EXPANSION TRIM (GET) (2) 1/4-14 X 7/8"

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN)

* It is important that 1/4-14 X 1 1/4" SHOULDERS are installed through the center of the slotted holes of the rake support. ** NOTE: Field cut outside closure for higher roof pitches.