STC MSC Roof Panel

STC-MSC Inset Gable Tail Height Change w Special Trim

TRI-BEAD TAPE MASTIC SPECIAL TRIM TOP (SPT- ) INSIDE CLOSURE

BL

*WALL PANEL

HEIGHT CHANGE ANGLE (A-20-H)

SIKA 511 CAULK IN LOCKFORM OF SPECIAL TRIM TOP (SPT- ) (BEFORE ASSEMBLING) (SEE INSET DETAIL)

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

1/4-14 X 1 1/4" WT (12" C.C. AND FASTEN THROUGH CLIP)

* FIELD CUT BOTTOM OF WALL PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION. 1 4 "

STC/MSC ROOF PANEL

**

PRE-GLUED THERMAL SPACER (NOT BY CHIEF)

PURLIN

HEIGHT CHANGE TRIM BOTTOM (GHMBF)

PANEL CLIP

DRAFTING NOTE: ** Thermal spacer to be used with no insulation.

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN)

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING)