STC MSC Roof Panel

STC-MSC Eave Isometric w Gutter

(22) 1/8" X 3/8" BLIND RIVETS

STC/MSC ROOF PANEL

STC/MSC ROOF PANEL

(4) 1/8" X 3/8" BLIND RIVETS

GABLE TRIM (GTMC)

GABLE TRIM (GTMC)

GUTTER STRAP (GSM) (FASTENERS NOT SHOWN)

*DOUBLE BEAD TAPE MASTIC

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

FILL HOLE W/ 1/8" X 3/8" BLIND RIVET (BOTH LEGS)

(12) 1/8" X 3/8" BLIND RIVETS

*TRAPEZOID PLUG (TRP)

GABLE TRIM PLUG (TPRMC/TPLMC)

EAVE GUTTER (EGM)

GABLE CORNER TRIM (GCTMC)

2" STRIP OF MINOR RIB TAPE SEALER (TYP.)

GABLE EXPANSION TRIM (GET)

NOTE: 1. Use 2" lap at splices, and field cut 3/8" lockform at splice. 2. Fasten splice with (12) 1/8" x 3/8" blind rivets. 3. Use SIKA 511 sealant at splice.

NOTE: 1. Start gable trim 3" out from end of roof panel. Notch gable trim to avoid corner box rivets. 2. Start eave gutter 3" out from endwall building line. 3. Locate Gable Trim Plug as close to building line as possible. Field notch as required. 4. Use SIKA 511 sealant at plug and corner trim to gutter.

EAVE GUTTER (EGM)

*EDGE OF MASTIC ALIGNS WITH FACE OF TRAPEZOID PLUG

DOUBLE BEAD TAPE MASTIC

GABLE TRIM SPLICE

TRAPEZOID PLUG INSTALLATION WITH GUTTER

GABLE CORNER TRIM WITH GUTTER