STC MSC Roof Panel

STC-MSC Fixed Mid-Slope-High Floating Eave w Thermal Spacer and Oversize Eave Gutter

** TRAPEZOID PLUG (TRP) EACH HIGH RIB DOUBLE BEADTAPE MASTIC (TOP AND BOTTOM) TRI-BEAD TAPE MASTIC (TOP AND BOTTOM)

1/4-14 X 1" (2 PER CLOSURE) METAL INSIDE CLOSURE (2) 1/4-14 X 7/8" WT GUTTER STRAP TO ROOF PANEL* 2" STRIP OF TRI-BEAD TAPE MASTIC BETWEEN PANELS 1/4-14 X 1 1/4" WT PANEL TO EAVE (8 PER PANEL)

BL

7 15

16 "

6"

GUTTER STRAP (GSM) AT EACH HI-RIB

1/4-14 X 7/8" WT (6" C.C) (1/4-14 X 1" AT FLAT STRAP) *** 1/4X14 X 1" (EACH STRAP)

FLAT STRAP (PL- )

****

EQ. EQ.

#12-14 X 1 1/4" (EACHSTRAP) (TRIM COLOR)

1 1 2 " MIN.

1/4-14 X 1 1/4" SHOULDER (12" C.C.) FASTENER MUST BE CENTERED IN SLOT STC/MSC ROOF PANEL FLOATING EAVE PLATE TRI-BEAD TAPE MASTIC

SPECIAL EAVE GUTTER (SPT- )

TRIM CAP (TCM)

WALL PANEL #12-14 X 1 1/4" (__" C.C.) INSIDE CLOSURE ****** 1/4-14 X 7/8" (12" C.C.)

*** Field drill 1/4" dia. hole in gutter strap, field drill 1/8" dia. Pilot hole in flat strap if required. * Field cut (2) 2" long strips of tri-bead tape mastic & center under 1/4-14 x 7/8" WT between gutter strap and roof panel. ** See isometric Trapezoid Plug Installation detail for installation instructions. **** Maintain 1 1/2" minimum from face of cap trim to panel screw

EAVE STRUT

*****

DRAFTING NOTES: ***** Eave strut on stc/msc roof floating eave

High Clip = CS standard ES no offset key plan type S. ****** Inside closure must be provided on buildings with liner insulation system.