STC MSC Roof Panel

STC-MSC Gable End w Vert Leg Set Back from Bldg Line and Term Trim and Nichiha Panel NBC

TERMINATION TRIM (GTTM) #12-14 X 1 1/4" (24" C.C.) 1/4-14 X 7/8" WT (6" C.C.) TRI-BEAD TAPE SEALER RAKE SUPPORT (A-20-S) #12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) RAKE ANGLE (A-20-B) SPECIAL GABLE TRIM (SPT-X)

* 1/4-14 X 1 1/4" SHOULDER (24" C.C.)

1

1/4-14 X 1 1/4" WT (12" C.C.) RAKE SUPPORT (A-20-S) TRI-BEAD TAPE SEALER

BL

* 1/4-14 X 1 1/4" SHOULDER (24" C.C.)

STC/MSC ROOF PANEL

***

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN) (TYP) PURLIN RAKE ANGLE (A-20-B) PRE-GLUED THERMAL SPACER (NOT BY CHIEF)

(2) FASTENERS (NOT BY CHIEF)

SPECIAL PURCHASED (IF BY CHIEF)

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.) GABLE EXPANSION TRIM (GET)

FASTENERS (NOT BY CHIEF) (12" C.C.) SPECIAL PURCHASED (IF BY CHIEF)

** NOTE: CONNECTION OF NICHIHA PANELS (NOT BY CHIEF), TO WALL PANEL IS NOT BY CHIEF. * IT IS IMPORTANT THAT 1/4-14 X 1 1/4" SHOULDERS ARE INSTALLED THROUGH THE CENTER OF THE SLOTTED HOLES OF THE RAKE SUPPORT.

WALL PANEL

** _" NICHIHA PANEL (NOT BY CHIEF)

***DRAFTING NOTE: THERMAL SPACER TO BE USED WITH NO INSULATION