STC MSC Roof Panel

STC-MSC Gable Tail End w Termination Trim and Nichiha Panel Not by Chief

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) RAKE ANGLE (A-20-B) RAKE SUPPORT (A-20-S) TERMINATION TRIM (GTTM) 1/4-14 X 7/8" WT (6" C.C.) TRI-BEAD TAPE MASTIC

1/4-14 X 1 1/4" WT (24" C.C.) * 1/4-14 X 1 1/4" SHOULDER (24" C.C.)

BL

TRI-BEAD TAPE MASTIC

1/4-14 X 1 1/4" WT (12" C.C. AND FASTEN THROUGH CLIP) PANEL CLIP W/ FASTENERS (SEE ROOF PANEL PLAN)

STC/MSC ROOF PANEL

(2) FASTENERS (NOT BY CHIEF) SPECIAL PURCHASED (IF BY CHIEF)

***

PRE-GLUED THERMAL SPACER (NOT BY CHIEF)

SPECIAL GABLE TRIM (SPT-X)

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.) GABLE EXPANSION TRIM (GET)

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN) PURLIN

FASTENERS (NOT BY CHIEF) (12" C.C.) SPECIAL PURCHASED (IF BY CHIEF)

** Connection of nichiha panels (not by Chief), to wall panel is not by chief. * It is important that 1/4-14 x 1 1/4" SHOULDER fasteners are installed through the center of the slotted holes of the rake support. DRAFTING NOTE: *** Thermal spacer to be used with no insulation.

WALL PANEL

** _" NICHIHA PANEL (NOT BY CHIEF)