Special Features

Z-Purlin to Rafter 10 Flange and CS Roof Trans Exp

** Maintain 3 1/2" between fixed and sliding purlin during building erection.

* Finger tighten 1st 1/2" dia. nut to hard washer, wrench tighten second nut to first nut to create a sliding connection.

SPECIAL RAK E ANGLE (PL- )

CL

2 1 4 "

4 1 2 "

(2) #12-14 X 1 1/4" (AT EACH PURLIN) (WALL COLOR)

(4) 1/2" X 1 1/4" BOLTS

1" REF PT

FIXED PURLIN

SLIDING PURLIN

5 1 8 "

SPECIAL PUNCH 9/16" HOLES AT 1 3/8" DIM A AND 4 1/4" GAGE IN BOTH PURLINS

1 3 8 "

1 1 4 "

1 3 8 " 4 1 4 "

MAKE FROM BASE ANGLE COIL

XBC-97 * (2) 1/2" X 1 3/4" BOLTS w/ (2) NUTS AND (1) 1/2" HARD WASHER AT SLOT (BOLTS MUST BE CENTERED IN SLOT

**3 1 2 "

3 1 4 "

ANGLE FLANGE BRACE (SEE CROSS SECTION FOR PIECE MARK AND BOLTING CONNECTION, INSTALL ONLY ON FIXED PURLIN SIDE)

FRAME RAFTER

Made with FlippingBook flipbook maker