Special Features

Z-Purlin to Rafter 10 Flange and MVF-MVP Roof Trans Exp

SPECIAL PUNCH 9/16" HOLES AT 1 3/8" DIM A AND 4 1/4" GAGE IN BOTH PURLINS

* Finger tighten 1st 1/2" dia. nut to hard washer, wrench tighten second nut to first nut to create a sliding connection.

** Maintain 3 1/2" between fixed and sliding purlin during building erection.

CL

2 1 4 "

4 1 2 "

(4) 1/2" X 1 1/4" BOLTS

FIXED PURLIN FRAME RAFTER

REF PT

SLIDING PURLIN

1 1 4 "

1 3 8 " 4 1 4 "

XBC-97 * (2) 1/2" X 1 3/4" BOLTS w/ (2) NUTS AND (1) 1/2" HARD WASHER AT SLOT (BOLTS MUST BE CENTERED IN SLOT)

**3 1 2 "

3 1 4 "

ANGLE FLANGE BRACE (SEE CROSS SECTION FOR PIECE MARK AND BOLTING CONNECTION, INSTALL ONLY ON FIXED PURLIN SIDE)