Special Features

STC-MSC Exp 3.5 inch GAP 2 inch TOTAL SLIDE wo T-SPCR

SUPPORT MATERIAL FOR DEKSTRIP AS REQUIRED (NOT BY CHIEF)

1/4-14 X 1 1/4" WT (6" C.C.) (TYP) EXPANSION JOINT TRIM TOP (SPT- ) TRI-BEAD TAPE SEALER (2 ROW) (TYP) DEKSTRIP

3"

4 1/2" 5 3 16 "

EXPANSTION JOINT TRIM BOTTOM (SPT- ) SIKA 511 CAULK

RAKE SUPPORT (A-20-S)

MSC/STC ROOF PANEL

1 2 "

PURLIN

* 1/4-14 X 1 1/4" SHOULDER (24" C.C.) (2) #12-14 X 1" PANCAKE HEAD (EACH PURLIN)

3 1 2 "

RAKE ANGLE (A-20-B)

PRE-GLUED THERMAL SPACER (NOT BY CHIEF) **

* IT IS IMPORTANT THAT FASTENERS ARE INSTALLED THROUGH THE CENTER OF THE SLOTTED HOLES OF THE RAKE SUPPORT AND THAT THESE FASTENER MUST NOT HIT THE PURLINS.

** DRAFTING NOTE: THERMAL SPACER TO BE USED WITH NO INSULATION.

SIKA 511 CAULK IN LOCKFORM OF EXPANSION JOINT TRIM TOP (BEFORE ASSEMBLING)