Special Features

Smart Canopy-STC-MSC Gable Lead-Height Change-FSP Ceiling Liner

* Field cut bottom of wall panels to match roof slope. Provide air gap of 1/4" min. at bottom of panel to avoid corrosion. **It is important that fasteners are installed through the center of the slotted holes of the rake support.

*WALL PANEL

1/4-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

INSIDE CLOSURE

TRI-BEAD TAPE SEALER SPECIAL TRIM (SPT- )

SIKA 511 CAULK IN LOCKFORM OF SPECIAL TRIM TOP (SPT- ) (BEFORE ASSEMBLING) (SEE INSET DETAIL)

HEIGHT CHANGE ANGLE (A-20-H)

1/4-14 X 1 1/4" WT (12" C.C.) PRE-GLUED THERMAL SPACER (NOT BY CHIEF)

1

4 "

STC/MSC ROOF PANEL

PURLIN

2 7 8 "

(2) #12-14 X 1 1/4" (GM) (36" C.C.)

HEIGHT CHANGE TRIM BOTTOM (GHMBF)

RAKE SUPPORT (A-20-S)

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN)

1 4 "

RAKE ANGLE (A-20-B)

CEILING LINER PANEL (FSP) PANEL SUPPORT (SSSP)

INSIDE CLOSURE WALL PANEL

1/8" X 3/8" BLIND RIVET (12" C.C.) #12-14 X 1" PANCAKE HEAD (12" C.C.)

** 1/4-14 X 1 1/4" SHOULDER (24" C.C.)

JAMB TRIM

(2) 1/2" X 1 1/4" BOLTS

OUTSIDE CLOSURE

CANOPY TRUSS FRAMING SPECIAL TRIM (SPT- ) 1/4-14 X 7/8" (12" C.C.)

8"

CL

SIKA 511 CAULK IN LOCKFORM OF SPECIAL TRIM TOP (SPT- ) (BEFORE ASSEMBLING)