Special Features

STC-MSC Gable Field Bend Vertical Leg - Taller Backup Panel and Thermal Spacer

** FIELD CUT BOTTOM OF BACK-UP PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION.

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING)

INSIDE CLOSURE w/ TAPE MASTIC TOP & BOTTOM

1

INSIDE CLOSURE

**BACK-UP PANEL

HEIGHT CHANGE TRIM TOP (GHMTF) TRI-BEAD TAPE SEALER SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING) (SEE INSET DETAIL)

BL

1/4-14 X 1 1/4" WT (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

RAKE SUPPORT (A-20-T)

1/4-14 X 1 1/4" WT (12" C.C.) STC/MSC ROOF PANEL (FIELD FORM 3" VERTICAL LEG TO FIT FINAL DIMENSION)

* It is important that fasteners are installed through the center of the slotted holes of the rake support. TAPE MASTIC SENT FOR BACK-UP PANEL SIDE LAPS. WARRANTY FASTENERS SENT FOR BACK-UP PANEL.

THERMAL SPACER

(NOT BY CHIEF)

1

4 "

HEIGHT CHANGE ANGLE (A-20-H)

HEIGHT CHANGE TRIM BOTTOM (GHMBF)

2"

1/4-14 X 1 1/4" SHOULDER (24" C.C.)*

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN) PURLIN