Special Features

MVF-MVP Height Change w Cut Roof Panel at Gable Lead End - Taller Backup Panel and Thermal Spacer

* Field cut bottom of back-up panels to match roof slope. Provide air gap of 1/4" min. at bottom of panel to avoid corrosion.

ROOF PANEL CUT BACK DIM. CLIP LOCATION FROM B

L

HEIGHT CHANGE TRIM BOTTOM (GHVB) HEIGHT CHANGE TRIM TOP (GHVT)

Tape Mastic sent for back-up panel side laps. Warranty fasteners sent for back-up panel.

BL

TAPE MASTIC

*BACK-UP PANEL INSIDE CLOSURE w/TAPE MASTIC TOP & BOTTOM 1/4-14 X 1 1/4" WT

DOUBLE BEAD TAPE MASTIC 1/4-14 X 1 1/4" WT (6" C.C.)** DOUBLE BEAD TAPE MASTIC (2) #12-14 X 1 1/4" (EACH CLIP) WALL COLOR

2 1 4 "

1 1 2 "

(6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

MVF/MVP ROOF PANEL RAKE ANGLE (A-20-B)

PANEL CLIP w/FASTENERS (REFER TO ROOF PANEL PLAN)

1

4 "

PANEL CLIP RAKE ANGLE (A-20-L)

THERMAL SPACER

(NOT BY CHIEF)

#12-14 X 1 1/4" (2 EACH PURLIN) (WALL COLOR)

PURLIN

(2) #12-14 X 1 1/4" (WALL COLOR)

**NOTE: This fastener must not hit the purlin.