Special Features

Parapet at Endwall w CS Roof Panel and Nichiha Panel Not by Chief

DRAFTING: DIMENSION HORIZ. LEG OF CAP TRIM. HAVE PM VERIFY DIM. WITH BLDR.

NOTE: ·

TAPE MASTIC SENT FOR BACK-UP PANEL SIDE LAPS. WARRANTY FASTENERS SENT FOR BACK-UP PANEL.

Field notch the hems 2" to allow for the trim to lap. Leave a two inch space between the cleats at the connection of the parapet cap trim. Apply a 1/4" bead of Sikalastomer-511 and install 10 blind rivets at each joint.

·

HORIZONTAL LEG OF PARAPET CAP TRIM

BL

X"

·

#12-14 X 1 1/4" (24" C.C.)

SPECIAL PARAPET CLEAT (SPT-X)

X"

PARAPET GIRT SPECIAL PARAPET CAP TRIM (SPT-X)

PANCAKE HEAD FASTENER (NOT BY CHIEF) (12" C.C.)

SPECIAL PARAPET CAP TRIM (SPT-X) (OVERLAPPING)

SPECIAL PURCHASED (IF BY CHIEF) XXX'-X"

1/4-14 X 7/8" WT (12" C.C.)

SIKA-511

SPECIAL PARAPET CAP TRIM (SPT-X) (UNDERLAPPING)

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

2"

1/4-14 X 1 1/4" WT (6" C.C.) OUTSIDE CLOSURE

2"

1"

PARAPET/WALL PANEL

***BACK-UP PANEL

* _" NICHIHA PANEL (NOT BY CHIEF)

SPECIAL PARAPET CLEAT (SPT-X)

2" GAP

HEIGHT CHANGE ANGLE (A-20-H)

HEIGHT CHANGE TRIM (RHT-X) INSIDE CLOSURE w/ TAPE MASTIC TOP AND BOTTOM

SPECIAL PARAPET CLEAT (SPT-X) ISOMETRIC PARAPET / FACADE CAP TRIM SPLICE DETAIL

1/4-14 X 1 1/4" WT (6" C.C.)

1/4-14 X 1 1/4" WT (12" C.C.)

#12 - 14 X 1 1/4" (2 EACH PURLIN) (WALL COLOR)

DOUBLE BEAD TAPE MASTIC

1

4 "

CS ROOF PANEL

* NOTE: CONNECTION OF NICHIHA PANELS (NOT BY CHIEF), TO WALL PANEL IS NOT BY CHIEF. ** NOTE: FIELD NOTCH RAKE ANGLE ABOUT PARAPET POST AS REQUIRED. RAKE ANGLE IS PROVIDED FOR INSULATION TERMINATION.

*** FIELD CUT BOTTOM OF BACK-UP PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION.

1 4 "

1"

PURLIN