Steel Framing Sections

1-4.Flange Brace XSST-1 Tabs

NOTE: · Field bend flange brace into place to align with holes in purlins/girts, as required. · Fill all holes in the flange brace with bolts. · If flange brace connection occurs within the purlin lap, install flange brace before tightening purlin bolts. · Flange brace may be one side only. For location and number of sides refer to Cross Sections, Endwall and Sidewall drawings.

BRACE DISTANCE

(3) 1/2" X 1 1/4" BOLTS RAFTER/COLUMN PURLIN/GIRT

FLANGE BRACE TAB (XSST-1)

FLANGE BRACE (FB-x)

1/2" X 1 1/4" BOLTS (1/2" x 1 3/4" BOLTS AT 5/8" THICK FLANGE)

FLANGE BRACE "1-4 CONNECTION"