Chief Buildings Details Guide V5.2

CHIEF BUILDINGS DETAILS GUIDE

ENDWALL RAFTER BEAM

EAVE STRUT

PURLIN

RIGID FRAME RAFTER

SIDEWALL GIRT

CORNER POST

RIGID FRAME COLUMN

HEADER

PERMANENT BUILDING BRACING

ENDWALL POST

OVERHEAD DOOR F.O.

DOOR JAMB

LEAN-TO RAFTER BEAM

ENDWALL GIRT

LEAN-TO FRAME COLUMN

WINDOW F.O.

DOOR JAMB

WALK DOOR F.O.

V 5.2

REVISED 02-01-17

DETAILS GUIDE

Table of Contents

Section 1

Introduction

Section 2: General Information

Unloading Procedure Purlin and Girt Punching Welding Recommendations

2.01 2.04 2.06

Section 3: Building Components

Sealants

3.01 3.02 3.07 3.08 3.11 3.12 3.13 3.14 3.16 4.01 4.02 4.04 4.06 4.08 4.11 4.14

Bolting Clips

Miscellaneous Components

Gable and Eave Trim

Corner and Opening Trim

Base Trim

Miscellaneous Trim Roof Extension Trim

Slide Door Trim

Section 4: Framing Details

Eave Strut

Purlins Bracing

Endwall Framing

Girts

Sag Angles

Rake and Corner Angle

Section 5: Special Framing Details

Framed Openings Boxed Headers

5.01 5.03 5.04 5.06

Brace Backs

Purlin Closures

REVISED 02-01-17

DETAILS GUIDE

Table of Contents (continued)

Section 6: CS/AP Wall Panel Details

CS Wall Panel AP Wall Panel

6.01 6.03 6.05 6.06 6.08 6.09 6.10 6.12

One Piece Base Angle

Overhead Doors and Windows – CS Panel

Walkdoors – CS Panel

Overhead Doors and Windows – AP Panel

Walkdoors – AP Panel

Louver Installation

Section 7: Roof Paneling Details

CS - Roof Panel

7.01 7.03 7.05 7.07 7.08

CS – Gable and Eave Trim CS – Light Transmitting Panels

Dektite Roof Jacks

Ridge Vents

REVISED 02-01-17

INTRODUCTION

CHIEF Buildings’ goal is to provide its Builders with the highest quality products available in the

Industry. All building components manufactured by CHIEF Buildings are guaranteed to be free from

defects in material and workmanship for five years from the date of shipment, providing these

components and accessories are prepared and erected in accordance with CHIEF specifications and

instructions. CHIEF also warrants all other building components and/or accessories which are sold or

delivered (not manufactured) by CHIEF Buildings to the extent of the warranty as given to CHIEF by

the manufacturer of each specific product. UNLESS OTHERWISE STATED, CHIEF INDUSTRIES

EXPRESSLY EXCLUDES WARRANTIES OF MERCHANTABILITY AND/OR IMPLIED FITNESS.

This Manual is intended to provide CHIEF Builders with some guidelines for the purpose of

familiarizing him with standard conditions. However, due to the versatility and complexity of CHIEF

building designs, individual situations may vary. Please refer to the erection drawings, installation

instructions, erection manuals and installation manuals sent with your project. The erection drawings

that are sent for your individual building project shall take precedence over any materials included in

this manual.

CHIEF Industries does not guarantee nor shall we be held liable for the quality of erection, nor

assume the responsibility for building defects that may be attributed to improper erection techniques or

the negligence of other parties. Due to continuing research and product development, CHIEF Buildings

reserves the right to at any time change the products and/or procedures as described in this manual.

CHIEF Building Systems are designed for versatility and quality, when erected in accordance

with plans and instructions they are superior in performance and value to any other system available

today. THANK YOU FOR CHOOSING CHIEF.

1.0

REVISED 02-01-17