Eave and Gable Extensions

STC-MSC Low Side Eave Ext w Eave Gutter and NO Soffit and Thermal Spacer

1/8" X 3/8" BLIND RIVET (PARCHMENT) (2 PER PLUG) TRAPEZOID PLUG (TRP) AT EACH HIGH RIB PRE-GLUED THERMAL SPACER FOR EAVE EXTENSION (NOT BY CHIEF) PANEL CLIP W/ FASTENERS (SEE ROOF PANEL PLAN)

BL

1/4-14 X 7/8" WT (6" C.C.) DOUBLE BEAD TAPE MASTIC (TOP AND BOTTOM) * TRAPEZOID PLUG (TRP) AT EACH HIGH RIB ** (2) 1/4-14 X 7/8" WT GUTTER STRAP TO ROOF PANEL

METAL INSIDE CLOSURE TRI-BEAD TAPE MASTIC (TOP AND BOTTOM) STC/MSC ROOF PANEL 2" STRIP OF TRI-BEAD TAPE MASTIC BETWEEN PANELS 1/4-14 X 1 1/4" WT (8 PER PANEL)

1/4-14 X 1 1/4" WT (6 PER PANEL)

GUTTER STRAP (GSM) AT PANEL HI-RIBS

#12-14 X 1 1/4" (TRIM COLOR)

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

INTERMED. PURLIN ****

EAVE GUTTER (EGM) 1/4-14 X 7/8" (12" C.C.) EAVE EXTENSION FLASHING (EEFA)

INSIDE CLOSURE ***

WALL PANEL

1/4-14 X 7/8" (12" C.C.) PANEL CAP TRIM (SCT)

#12-14 X 1 1/4" (12" C.C.) (TRIM COLOR) 1/4-14 X 1" (2 PER CLOSURE)

EXTENSION FLASHING (EF)

PANEL OVERHANG

GUTTER STRAP LAP

PITCH

NOTE: Jamb trim around extension beam as required. * See isometric Trapezoid Plug Installation detail for installation instructions.

<=3/4:12 >3/4:12 to <=1 1/2:12 >1 1/2:12 to <=2 1/2:12 >2 1/2:12 to <=3 1/2:12 >3 1/2:12 to <=4 1/2:12 ALL DIMENSIONS IN INCHES 4 1/2 3 1/2 3 1/2 4 4 1/4

7 7/8 7 1/2

DRAFTING NOTES: *** Inside closure must be provided on buildings with liner insulation system. **** If intermediate purlin is required, chg purlin, t-spacer and all fasteners to "dim" layer.

7 1/8

** Field cut (2) 2" long strips of tri-bead tape mastic & center under 1/4-14 x 7/8" WT's between gutter strap and roof panel.

6 7/16

5 3/4