STC MSC Roof Panel

MSC 2-Inch-High Side Height Change-Cee Girt-Panel Below-Thermal Spacer

#12-14 X 1 1/4" (TYP) (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) RAKE ANGLE (A-20-B) WALL PANEL (TYP.)

INSIDE CLOSURE

BL

(2) #12-14 X 1 1/4" (GA) (36" C.C.)

HEIGHT CHANGE GIRT

*1/4-14 X 7/8" WT HEIGHT CHANGE TRIM (LHET)

**TRI-BEAD TAPE MASTIC OUTSIDE CLOSURE 1/4-14 X 1 1/4" WT (9 PER PANEL) TRI-BEAD TAPE MASTIC PANEL CLIP W/ FASTENERS (SEE ROOF PANEL PLAN) (TYP)

1

4 "

THERMAL SPACER MSC ROOF PANEL

(NOT BY CHIEF)

Provide air gap of 1/4" min. at bottom of panel to avoid corrosion.

PURLIN BACK-UP PLATE

* For screw spacing refer to High Side Height Change detail in the MSC/STC Roof Panel Erection Manual. ** Tri-Bead Tape Mastic from roll.

4"

8"