STC MSC Roof Panel

STC-MSC Inset Gable Lead Height Change

** IT IS IMPORTANT THAT FASTENERS ARE INSTALLED THROUGH THE CENTER OF THE SLOTTED HOLES OF THE RAKE SUPPORT.

HEIGHT CHANGE TRIM TOP (GHMTF) INSIDE CLOSURE

* FIELD CUT BOTTOM OF WALL PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION.

* WALL PANEL

BL

HEIGHT CHANGE ANGLE (A-20-H)

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING) (SEE INSET DETAIL) TRI-BEAD TAPE SEALER

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) RAKE SUPPORT (A-20-S)

1/4-14 X 1 1/4" WT (12" C.C.)

***

PRE-GLUED THERMAL SPACER (NOT BY CHIEF)

PURLIN STC ROOF PANEL

*** DRAFTING NOTE: THERMAL SPACER TO BE USED WITH NO INSULATION.

1

4 "

1/4-14 X 1 1/4" SHOULDER (24" C.C.)** HEIGHT CHANGE TRIM BOTTOM (GHMBF)

2"

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN)

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING)