STC MSC Roof Panel

STC-MSC Inset Gable Lead Height Change and Thermal Spacer

INSIDE CLOSURE HEIGHT CHANGE TRIM TOP (GHMTF) TRI-BEAD TAPE SEALER

* FIELD CUT BOTTOM OF WALL PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION.

BL

HEIGHT CHANGE ANGLE (A-20-H) #12-14 X 1 1/4" * WALL PANEL

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING) (SEE INSET DETAIL)

1/4-14 X 1 1/4" WT (12" C.C.)

(6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

STC/MSC ROOF PANEL THERMAL SPACER

(NOT BY CHIEF)

PURLIN

1

4 "

RAKE SUPPORT (A-20-T)

HEIGHT CHANGE TRIM BOTTOM (GHMBF)

2"

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN) 1/4-14 X 1 1/4" SHOULDER (24" C.C.)**

** IT IS IMPORTANT THAT FASTENERS ARE INSTALLED THROUGH THE CENTER OF THE SLOTTED HOLES OF THE RAKE SUPPORT.

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING)