STC MSC Roof Panel

STC-MSC Inset Gable Tail Height Change and Thermal Spacer

HEIGHT CHANGE ANGLE (A-20-H) * WALL PANEL #12-14 X 1 1/4"

* FIELD CUT BOTTOM OF WALL PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION.

BL

TRI-BEAD TAPE SEALER HEIGHT CHANGE TRIM TOP (GHMTF) INSIDE CLOSURE

(6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

1/4-14 X 1 1/4" WT (12" C.C.) TRI-BEAD TAPE SEALER

THERMAL SPACER STC/MSC ROOF PANEL

(NOT BY CHIEF)

1

4 "

RAKE SUPPORT (A-20-T)

HEIGHT CHANGE TRIM BOTTOM (GHMBF) 1/4-14 X 1 1/4" SHOULDER (24" C.C.)**

2"

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN)

PURLIN

** IT IS IMPORTANT THAT FASTENERS ARE INSTALLED THROUGH THE CENTER OF THE SLOTTED HOLES OF THE RAKE SUPPORT.

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING)