STC MSC Roof Panel

STC-MSC Eave Isometric w Gutter

(20) 1/8" X 3/8" BLIND RIVETS

STC/MSC ROOF PANEL

STC/MSC ROOF PANEL

GABLE TRIM (GTM)

GABLE TRIM (GTM)

GUTTER STRAP (GSM) (FASTENERS NOT SHOWN)

*DOUBLE BEAD TAPE MASTIC

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

(12) 1/8" X 3/8" BLIND RIVETS

EAVE GUTTER (EGM)

*TRAPEZOID PLUG (TRP)

GABLE TRIM PLUG (TPRM/TPLM)

2" STRIP OF MINOR RIB TAPE SEALER (TYP.)

GABLE CORNER TRIM (GCTM)

GABLE EXPANSION TRIM (GET)

NOTE: 1. USE 1 1/2" LAP AT SPLICES, AND FIELD CUT 3/8" LOCKFORM AT SPLICE. 2. FASTEN SPLICE WITH (12) 1/8" X 3/8" BLIND RIVETS. 3. USE SIKA 511 SEALANT AT SPLICE.

NOTE: 1. START GABLE TRIM 3" OUT FROM END OF ROOF PANEL. 2. START EAVE GUTTER 3" OUT FROM ENDWALL BUILDING LINE. 3. LOCATE GABLE TRIM PLUG AGAINST HIGH-RIB OF CS ENDWALL PANEL OR FLAT OF AP ENDWALL PANEL. 4. USE SIKA 511 SEALANT AT PLUG AND CORNER TRIM TO GUTTER.

EAVE GUTTER (EGM)

*EDGE OF MASTIC ALIGNS WITH FACE OF TRAPEZOID PLUG

DOUBLE BEAD TAPE MASTIC

GABLE TRIM SPLICE

TRAPEZOID PLUG INSTALLATION WITH GUTTER

GABLE CORNER TRIM WITH GUTTER