STC MSC Roof Panel

STC-MSC Fixed Mid-Slope-Low Floating Eave and Oversize Eave Gutter

FLOATING EAVE PLATE 1/4-14 X 1" (2 PER CLOSURE) METAL INSIDE CLOSURE *(2) 1/4-14 X 7/8" WT GUTTER STRAPTO ROOF PANEL 2" STRIP OF TRI-BEAD TAPE MASTIC BETWEEN PANELS 1/4-14 X 1 1/4" WT PANEL TO EAVE (8 PER PANEL)

** TRAPEZOID PLUG (TRP) EACH HIGH RIB TRI-BEAD TAPE MASTIC (TOP AND BOTTOM) 1/4-14 X 7/8" WT (6" C.C) (1/4-14 X 1" AT FLAT STRAP) DOUBLE BEAD TAPE MASTIC (TOP AND BOTTOM)

BL

7 15

16 "

6"

GUTTER STRAP (GSM) AT EACH HI-RIB

EQ. EQ.

*** 1/4-14 X 1" (EACH STRAP)

FLAT STRAP (PL- )

1 1 2 " MIN.

****

STC/MSC ROOF PANEL

#12-14 X 1 1/4" (EACH STRAP) (TRIM COLOR)

1/4-14 X 1 1/4" SHOULDER (12" C.C.) FASTENER MUST BE CENTERED IN SLOT TRI-BEAD TAPE MASTIC EAVE STRUT*****

SPECIAL EAVE GUTTER (SPT- )

*** Field drill 1/4" dia. hole in gutter strap, field drill 1/8" dia. Pilot hole in flat strap if required. * Field cut (2) 2" long strips of tri-bead tape mastic & center under 1/4-14 x 7/8" WT between gutter strap and roof panel. ** See isometric Trapezoid Plug Installation detail for installation instructions. **** Maintain 1 1/2" minimum from face of cap trim to panel screw

SPECIAL TRIM (SPT- ) 1/4-14 X 7/8" (12" C.C.) INSIDE CLOSURE ****** WALL PANEL #12-14 X 1 1/4" (___" C.C.)

DRAFTING NOTES: ***** Eave strut on stc/msc roof floating eave

High Clip = CS standard ES no offset key plan type S. ****** Inside closure must be provided on buildings with liner insulation system.