STC MSC Roof Panel
STC-MSC Gable End w Vert Leg Set Back from Bldg Line and Term Trim and Nichiha Panel NBC
TERMINATION TRIM (GTTM) #12-14 X 1 1/4" (24" C.C.) 1/4-14 X 7/8" WT (6" C.C.) TRI-BEAD TAPE SEALER RAKE SUPPORT (A-20-S) #12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) RAKE ANGLE (A-20-B) SPECIAL GABLE TRIM (SPT-X)
* 1/4-14 X 1 1/4" SHOULDER (24" C.C.)
1/4-14 X 1 1/4" WT (12" C.C.) RAKE SUPPORT (A-20-S) TRI-BEAD TAPE SEALER
BL
* 1/4-14 X 1 1/4" SHOULDER (24" C.C.)
STC/MSC ROOF PANEL
***
#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN) (TYP) PURLIN RAKE ANGLE (A-20-B) PRE-GLUED THERMAL SPACER (NOT BY CHIEF)
(2) FASTENERS (NOT BY CHIEF)
SPECIAL PURCHASED (IF BY CHIEF)
GABLE TRIM SUPPORT (GTS) (10'-0" C.C.) GABLE EXPANSION TRIM (GET)
FASTENERS (NOT BY CHIEF) (12" C.C.) SPECIAL PURCHASED (IF BY CHIEF)
* It is important that 1/4-14 x 1 1/4" SHOULDERS are installed through the center of the slotted holes of the rake support.
WALL PANEL
** _" NICHIHA PANEL (NOT BY CHIEF)
** NOTE: Connection of Nichiha Panels (not by Chief), to wall panel is not by Chief.
***DRAFTING NOTE: THERMAL SPACER TO BE USED WITH NO INSULATION
Made with FlippingBook flipbook maker