Composite Material, Rigid Board, R-Seal

STC-MSC Deck Rigid Roof Ridge

NOTES: * For screw spacing refer to Ridge detail in the MSC/STC Roof Panel Erection Manual.

NOTCH ANGLE TO AVOID INTERFERENCE WITH BACK-UP PLATE SCREWS

** 24" STC - Pre-Cut Tri-Bead Tape Mastic. 24" MSC - Tri-Bead Tape Mastic from roll. 18" MSC/STC - Tri-Bead Tape Mastic from roll.

1 1 2 "

***Insulation is representative. Erector shall refer to insulation manufacturer’s installation information for further details/direction. The erector is responsible for providing the final solution for installation, air tightness, and performance of the liner insulation system. **** See Roof Deck Fastener Details for additional fastener spacing information.

RAKE SUPPORT

4"

7"

ROOF PANEL SUPPORT

DECKING

DRAFTING NOTE: ***** Adjust panel length to compensate for composite roof thickness. Hold 4" clearance shown from the TOP of the composite .

L RIDGE GABLE ANGLE CLEARANCES

RIGID CONTINUOUS INSULATION (NOT BY CHIEF)

RIDGEL

* 1/4-14 X 7/8" WT ROOF CAP (RCL)

** TRI-BEAD TAPE MASTIC OUTSIDE CLOSURE TRI-BEAD TAPE MASTIC PRE-GLUED THERMAL SPACER (NOT BY CHIEF)

4"

X"

*****

PANEL CLIP W/ FASTENERS (SEE ROOF PANEL PLAN)

PANEL OVERHANG FROM PURLIN

MSC ROOF PANEL

TOP OF COMPOSITE MATERIAL

TOP OF COMPOSITE MATERIAL

TOP OF PURLIN

TOP OF PURLIN

1'-0" ***** Special Panel Clearance from Ridge at Top of Purlin.

DECKING *** ___" RIGID CONTINUOUS INSULATION (NOT BY CHIEF)

BEARING PLATE (HW7500)

**** ___ X ___ (___" C.C.)

#12-14 X 1" PANCAKE HEAD (__" C.C.) RIDGE PLATE (PL-x)

1/4-14 X 1 1/4" WT (8 PER PANEL)

BACK-UP PLATE

PURLIN