High Profile Trim

STC-MSC Gable Tail w High Profile Trim and Thermal Spacer

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) RAKE ANGLE (A-20-B) RAKE SUPPORT (A-20-T) GABLE TRIM (GTMH)

TRI-BEADTAPE SEALER 1/4-14 X 1 1/4" WT (12" C.C.) * 1/4-14 X 1 1/4" SHOULDER (24" C.C.) STC/MSC ROOF PANEL THERMAL SPACER

1

BL

(NOT BY CHIEF)

***

INSIDE CLOSURE

PURLIN

*** DRAFTING NOTE: INSIDE CLOSURE MUST BE PROVIDED ON BUILDINGS WITH LINER INSULATION SYSTEM.

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

(2) 1/4-14 X 7/8"

** OUTSIDE CLOSURE WALL PANEL 1/4-14 X 7/8" (12" C.C.) GABLE EXPANSION TRIM (GET)

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN)

* It is important that 1/4-14 x 1 1/4" shoulders are installed through the center of the slotted holes of the rake support.

** NOTE: Field cut outside closure for higher roof pitches.