High Profile Trim

STC-MSC High Side Eave Ext w Low Floating Eave High Profile Eave Trim and NO Soffit

*1/4-14 X 7/8" WT TRI-BEAD TAPE MASTIC

STC/MSC ROOF PANEL TRAPEZOID PLUG (TRP) AT EACH HI-RIB PANEL CLIP W/ FASTENERS (SEE ROOF PANEL PLAN) (NOT BY CHIEF) PRE-GLUED THERMAL SPACER ****

1/4-14 X 1 1/4" WT (9 PER PANEL) OUTSIDE CLOSURE **TRI-BEAD TAPE MASTIC

3 1 2 "

BL

PRE-GLUED THERMAL SPACER

(NOT BY CHIEF)

BACK-UP PLATE

HI-SIDE EAVE TRIM (HETMH) 1/4-14 X 7/8" (12" C.C.) HIGH SIDE EXTENSION FLASHING (HEEF)

1/8" X 3/8" BLIND RIVET (PARCHMENT) (2 PER PLUG)

*****

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

#12-14 X 1 1/4" (12" C.C.) (TRIM COLOR)

HIGH PROFILE TRIM-UNSOFFITED HS EAVE EXT STC/ MSC

*****

INSIDE CLOSURE ***

TRIM TYPE HEEF HEHP

PURLIN SIZE

1/4-14 X 7/8" (12" C.C.)

8

10

NOTE: Jamb trim around extension beam as required * For screw spacing refer to High Eave Trim detail in the MSC/STC Roof Panel Erection Manual. ** 24" STC - Pre-Cut Tri-Bead Tape Mastic. 24" MSC - Tri-Bead Tape Mastic from roll. 18" MSC/STC - Tri-Bead Tape Mastic from roll.

PANEL CAP TRIM (SCT)

HEEF = HIGHSIDE EAVE EXT. FLASHING HEHP = HIGHSIDE EAVE EXT. FLASHING

WALL PANEL

DRAFTING NOTE: *** Inside closure must be provided on buildings with liner insulation system. **** Thermal spacer to be used with no insulation.